Back to main page | Email me at: Gene!
What does bar code printed on the 82162 printer look like? Try this:
STO M Barcode
There are three ways of printing bar code on the 82162 printer presented below. One requires the plotter module. The other does not require the plotter module but uses some synthetic programming. The third does not use synthetic programming but requires the CCD module. Choose the one that is best suited to what you have. All three work equally well. Note: The programs below use a LOT of thermal paper. Be sure you have enough. If you run out, they will prompt you for the additional roll to be put in and continue. (Paper is still sold through Educalc (1-800-677-7001 in the US) and other places).
The link below goes to a VERY small program that will print program bar code on the 24 column 82162 thermal printer.
The link below goes to a larger program that will print program bar code on the 24 column 82162 thermal printer. This program does not require the plotter module.
The link below goes to a larger program that will print program bar code on the 24 column 82162 thermal printer. This program does not require the plotter module.
Program #1 Requirements: This program requires the HP-IL Module, the HP-IL 2225B thinkjet printer, the HP-41 Plotter Module, and the HP-IL Development Module.
The link below goes to a larger program that will print program bar code on the HP-IL Thinkjet printer printer.
Program #2 Requirements: This program requires the HP-IL Module, the HP-IL 2225B thinkjet printer, an HP-41CX or an HP-41CV with X-Functions/Memory, and the CCD Module.